Select Page

Un wood floor is a very good acquisition. They are strong and durable and can last for several decades without problems. There are many floors that are centuries old and still offer warmth, authenticity and charm today. But for a wooden floor to resist the wear and tear of time, it is necessary to take care of it.

Discover the town of Sainte-Agathe-des-Monts here

Sainte-Agathe-des-Monts is a city in Quebec located in the Les Laurentides regional county municipality, in the Laurentides administrative region. It is named in honor of Agatha of Catania. 

learn more

1. Protect the floor with rugs

Wood floors require little maintenance in general, but a lot depends on what you use them for. It is advisable to lay rugs in the most sensitive areas, such as entrances or under furniture, to avoid increased wear and tear in these areas.

2. Clean at least once a month

Cleaning a plancher requires special equipment. In fact, the wooden floor should not be exposed to de large quantities of water and it is preferable to use dampened microfiber cloths and a special hardwood soap.

3. Be careful with water and other liquids

As stated in the previous point, wood does not like water. It absorbs it, swells and can cause problems with the integrity of the floor. Avoid wet areas and always try to remove water immediately after it has fallen. Pay particular attention to stains from wine and other alcohol which can have a corrosive effect on the varnish and penetrate the wood.

4. Relocate furniture

To ensure that your floor shows even wear across its entire surface, it is important to move furniture from time to time. Be very careful, however, when moving furniture by lifting it so as not to leave marks.

dust-free sandblasting

5. Protect it from the elements

Water is a danger for wood, but so is the sun! Avoid direct exposure to sunlight by using curtains or veils. Indeed, wood can lose its color due to overexposure to the sun.

6. Take care of humidity

The ambient humidity in your home is also essential to keep your floor in good condition. Indeed, the absorbent power of wood also acts on the atmosphere. Over a short period of time this has very little impact, but a floor laid in a constantly damp room will suffer.

7. Apply varnish or oil

To protect a floor, varnish is undoubtedly the most practical and resistant solution. However, it is not necessarily the most ecological and you can also use oil. The only drawback is that it will need to be applied more regularly because the wood absorbs the oil.

8. Perform sanding every 10 or 20 years following use of the floor

When the floor begins to wear, it is best to sand the entire surface using professionals. THE floor sanding only takes a day or two and allows you to eradicate any moisture stains and scratches. You will then need to apply varnish or oil to protect it again.

We are the specialists in dust-free floor sanding

.TikTok         google 1instafcbk